Sata Controller Configuration - Gigabyte GA-6UASL1 User Manual

2-2-5 SATA Controller Configuration
SATA Controller
When enabled, the SATA controller will function normally.
Options available: Enabled/Disabled. Default setting is Enabled.
SATA Mode
Select the on chip SATA type.
IDE Mode: When set to IDE, the SATA controller disables its RAID and AHCI functions and runs in the
IDE emulation mode. This is not allowed to access RAID setup utility.
RAID Mode: When set to RAID, the SATA controllerenables both its RAID and AHCI functions. You will
be allows access the RAID setup utility at boot time.
ACHI Mode: When set to AHCI,the SATA controller enables its AHCI functionality. Then the RAID func-
tion is disabled and cannot be access the RAID setup utility at boot time.
Options available: IDE/RAID/ACHI. Default setting is ACHI Mode.
SATA Port 0/1/2/3/4/5
Displays the installed HDD devices.
BIOS Setup - 41 -