Init Display First - Gigabyte GA-6QPCV-RH User Manual

GA-6QPCV-RH Motherboard
Enabled
Disabled

Init Display First

This feature allows you to select the first initation of the monitor display from which card, when
you install an AGP VGA card and a PCI VGA card on board.
Onboard/AGP Set Init Display First to onbaord AGP Slot. (Default setting)
PCI Slot
On-borad LAN1
Enabled
Disabled
Lan 1 PXE OPROM
Enabled
Disabled
On-board LAN2
Enabled
Disabled
Lan 2 PXE OPROM
Enabled
Disabled
Azalia device will unconditionally enabled.
Disable Azalia device.
Set Init Display First to PCI Slot.
Enable onboard LAN1 controller function. (Default setting)
Disable onboard LAN1 controller function.
Enable onboard LAN1 PXE option ROM. (Default setting)
Disable onboard LAN1 PXE option ROM.
Enable onboard LAN2 controller function. (Default setting)
Disable onboard LAN2 controller function.
Enable onboard LAN2 PXE option ROM. (Default setting)
Disable onboard LAN2 PXE option ROM.
4 7