Gigabyte GA-6QPCV-RH User Manual page 6

Additional Notices
1. Flash SPI ROM Update BIOS & ME need in accordance with the worksheet
(Please see the illustrated table below:)
Checklist
The table provides a summarized checklist of principal steps requires to bring up a Intel
firmware release on CRB platform, arranged in the sequence that they should be performed.
Please use the checklist to ensure no steps were missed.
Build FW Image using FIT (Flash image tool)
Set optimal defaults in system BIOS
Shut down disable Intel
memory modules from Bank0
Program the image onto the SPI Flash using the FPR tool
Verify the image (fpt/v)
Shut down, do a clear CMOS using jumper J5H2
Restart the system to boot BIOS from the Flash
Enter BIOS setup and enable Intel
Do a full G3 reset (disconnect power cable for 10 seconds)
Restart the system and use CTRL-P to enter MEBx
Set desired Intel ME and Intel
®
Restart the system and begin Intel
Install OS
2. Recommanded CPU Cooler APR Vender: Cooler Master
Vender cooler P/N:GECC-00633-01-GP/ECC-00633-01-GP
3. GA-6QPCV-RH 90W Adpater Max Support I. 2.5" HDD *4
ME by closing the Manufacturing Mode jumper or removing all
®
TPM and Intel
®
AMT settings
®
AMT & Intel
® ®
II. 3.5" HDD * 2
6
AMT (through Security menu-> TPM)
®
TPM testing
Introduction
AMT
®