NETGEAR WNDR3700v3 Setup Manual page 8

Table 1. Status Light Descriptions (continued)
Item Function Activity
USB Off
6.
Solid Green
Fast Blinking
Green
The WLAN button toggles the WLAN function on and off. The WPS button turns on the WPS
function.
Table 2. Switch Button Descriptions
Item Function Activity
WLAN On
7.
On/Off
Off
WPS On On
8.
For more information on modes, see
Security Options" on page
Resource CD.
Getting to Know Your Wireless Router
Description
No USB device is connected, or the "Safely Remove Hardware"
button has been pressed and it is now safe to remove the attached
USB device.
The USB device has been accepted by the Router and is ready to be
used.
The USB device is in use.
Description
Pressing the wireless LAN button turns on the 2.4 GHz and 5 GHz
wireless radios, indicated by 2.4 GHz and 5 GHz LEDs being lit.
The 2.4 GHz and 5 GHz radios are off, and their LEDs are turned off.
The WPS function is turned on.
When you first push the WPS button, the WPS LED blinks green for
two minutes, during which it is synchronizing security for the wireless
client device.
Before turning on the WPS button, be sure that the WLAN button is
on. If both wireless radios are off (2.4 GHz and 5 GHz LEDs are off),
the WPS will not work.
"Configuring Your Wireless Settings and
20, and the online Reference Manual, available on the
4