Table of Contents
Advertisement
Plug and Play detection
Because infrared is always active on PCs running ME or XP (including
2
automatic software installation for Plug and Play devices), the Windows
Add New Hardware Wizard detects your phone as a new hardware device
during the PC Suite installation. This interferes with the PC Suite software
installation process.
Before installing PC Suite
Nokia recommends that Windows ME and XP users who want to use IR as
their serial connection for PC Suite perform the modem installation prior
to installing PC Suite. Please see "Wireless modem setup" on page 43 and
perform this task prior to installing Nokia PC Suite. Once you have
performed the modem installation, you may continue with the
installation instructions below.
• INSTALL PC SUITE
PC Suite is provided free of charge, and is available for download from the
US products section of http://www.nokia.com.
Please download the setup application to a location on your hard drive. If
you downloaded the application in segments, please double-click the first
segment's .exe file and follow the instructions to extract the installer
application from the segments.
Important: If you use Windows 98 (First or Second Edition) and
plan on using IR to connect to your PC, please enable IR
communications on your PC now.
Once the software download is complete and/or the segments have been
rejoined:
1
Double-click the installation file PC Suite 4.6.exe that you
downloaded to your hard drive.
2
Click Next to begin the software installation. Please read the end-
user license agreement, then click Yes to accept its terms.
3
Review the safety notes, then click Next.
[ 6 ]
Advertisement
Table of Contents
