NETGEAR WGR614v9 - 54 Mbps Wireless Router Reference Manual page 82

Wireless-G Router WGR614v9 Reference Manual
Table 6-1 describes the router status fields.
Table 6-1. Wireless Router Status Fields
Field
Account Name
Hardware Version
Firmware Version
Internet Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Domain Name Server
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
6-2
Description
The host name assigned to the router.
The hardware version of the router.
The version of the current software installed in the router. This will
change if you upgrade your router.
These settings apply to the Internet (WAN) port of the router.
The Media Access Control address. This is the unique physical
address being used by the Internet (WAN) port of the router.
The IP address being used by the Internet (WAN) port of the router. If
no address is shown, or is 0.0.0.0, the router cannot connect to the
Internet.
If set to None, the router is configured to use a fixed IP address on
the WAN. If set to DHCP Client, the router is configured to obtain an
IP address dynamically from the ISP.
The IP subnet mask being used by the Internet (WAN) port of the
router. For an explanation of subnet masks and subnet addressing,
click the link to the online document
Appendix B.
The Domain Name Server addresses being used by the router. A
Domain Name Server translates human-language URLs such as
www.netgear.com into IP addresses.
These settings apply to the Ethernet (LAN) port of the router.
The Media Access Control address. This is the unique physical
address being used by the LAN port of the router.
The IP address being used by the Ethernet (LAN) port of the router.
The default is 192.168.1.1.
Identifies whether the router's built-in DHCP server is active for the
LAN-attached devices.
The IP subnet mask being used by the Ethernet (LAN) port of the
router. The default is 255.255.255.0.
v1.1, May 2008
"TCP/IP Networking Basics" in
Using Network Monitoring Tools