Managing The Configuration File; Backing Up And Restoring The Configuration - NETGEAR WGR614v9 - 54 Mbps Wireless Router Reference Manual

Wireless-g router
Hide thumbs Also See for WGR614v9 - 54 Mbps Wireless Router:
Table of Contents

Advertisement

Wireless-G Router WGR614v9 Reference Manual
For each device, the table shows the IP address, NetBIOS host name or device name (if available),
and the Ethernet MAC address. To force the router to look for attached devices, click Refresh.
Note: If the router is rebooted, the table data is lost until the router rediscovers the
devices.

Managing the Configuration File

The configuration settings of the Wireless-G Router are stored within the router in a configuration
file. You can back up (save) this file to your computer, restore it, or reset it to the factory default
settings.
From the main menu of the browser interface, under Maintenance, select Backup Settings.
Figure 6-5
The following sections describe the three available options.

Backing Up and Restoring the Configuration

The Restore and Backup options in the Settings Backup screen let you save and retrieve a file
containing your router's configuration settings.
To save your settings, click Back Up. Your browser extracts the configuration file from the router
and prompts you for a location on your computer to store the file. You can give the file a
meaningful name at this time, such as comcast.cfg.
Tip: Before saving your configuration file, change the administrator password to the
default, password. Then change it again after you have saved the configuration file.
If you forget the password, you will need to reset the configuration to factory
defaults.
6-6
v1.1, May 2008
Using Network Monitoring Tools

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgr614 - wireless-g router wireless

Table of Contents