Backing Up Your Configuration; Understanding Your Firewall - NETGEAR WGR614v9 - 54 Mbps Wireless Router Reference Manual

Backing Up Your Configuration

The configuration settings of the Wireless-G Router are stored within the router in a configuration
file. You can back up (save) this file and retrieve it later. NETGEAR recommends that you save
your configuration file after you complete the configuration. If the router fails or becomes
corrupted, or an administrator password is lost, you can easily re-create your configuration by
restoring the configuration file.
For instructions on saving and restoring your configuration file, see
File" on page 6-6.
Tip: Before saving your configuration file, change the administrator password to the
default, password. Then change it again after you have saved the configuration file.
If you save the file with a new password, and then you later forget the new
password, you will have to reset the router back to the factory defaults and log in
using the default password of password. This means you will have to re-enter all the
router configuration settings.

Understanding Your Firewall

Your Wireless-G Router Model WGR614v9 contains a true firewall to protect your network from
attacks and intrusions. A firewall is a device that protects one network from another while
allowing communication between the two. Using a process called Stateful Packet Inspection, the
firewall analyzes all inbound and outbound traffic to determine whether or not it will be allowed to
pass through.
By default, the firewall allows any outbound traffic and prohibits any inbound traffic except for
responses to your outbound traffic. However, you can modify the firewall's rules to achieve the
following behavior:
• Blocking sites. Block access from your network to certain Web locations based on Web
addresses and Web address keywords. This feature is described in
Internet Sites" on page
• Blocking services. Block the use of certain Internet services by specific computers on your
network. This feature is described in
• Scheduled blocking. Block sites and services according to a daily schedule. This feature is
described in "Scheduling Blocking" on page
Safeguarding Your Network
Wireless-G Router WGR614v9 Reference Manual
3-1.
"Blocking Access to Internet Services" on page
3-5.
v1.1, May 2008
"Managing the Configuration
"Blocking Access to
3-3.
2-15