Eeprom Clear Check; Continuous Run Mode - Samsung WF350ANP/XAA Technical Information

ALIGNMENT AND ADJUSTMENTS
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.

EEPROM Clear Check

Definition of EEPROM Clear Mode:
- EEPROM initialization.
- All course/option settings are to be reset to default values
after EEPROM initialization.
- When Service arises and it needs PCB replacement,
EEPROM should be reset.
How to Enter:
- The unit needs to be on.
- Press Delay Start Key, Signal Key, and Power Key at the same time.

Continuous Run Mode

Definition of Continuous Run Mode:
- Will continuously repeat the current cycle until the Continuous Run Mode is cancelled.
(Normal User Mode)
How to Enter:
- Press Pre Wash Key and Pure Cycle Key together for 3 sec.
Continuous Run Mode:
. Press Pre Wash + Pure Cycle 3 sec during Power On State (Normal User Mode) .
. Once in Continuous Run Mode, The seven segments will no longer display "0000" and will alternate
between displaying the number of cycles of the completed course and the remaining time of the course.
. The Continuous Run Mode will repeat the previous cycle until continuous run mode is cancelled.
. During Continuous Run Mode, press Pre Wash + Pure Cycle 3 seconds to return to normal user
mode. The seven segments will no longer display the number of cycles and will display the
maintenance time only.
. If you exit Service Mode after entering it from Continuous Mode, the washing machine returns
to Continuous Mode.
. If power is lost in Continuous Run Mode (that is, when the power plug is disconnected or the
Power key is pressed turning the washing machine off ), the mode is released when the washing
machine is turned on again.
Pre Wash + Pure Cycle
Power On State
WARNING
Continuous Run Mode
3 sec

EEPROM Clear Mode
EEPROM check ?
YES
Display "Good"
NO
Display "FAIL"