Operating The Washer - LG WM2240CW Owner's Manual

Owner's manual
Hide thumbs Also See for WM2240CW:
Table of Contents

Advertisement

Available languages

Available languages

H O W TO U S E

OPERATING THE WASHER

Once you have loaded the washer and added
laundry products (detergent, bleach, and/or fabric
softener):
A
Press the ON/OFF button to turn on the
washer. The lights around the
cycle selector knob will illuminate.
B
Turn the cycle selector knob to the desired
cycle. The display will show the
preset Wash Temp., Spin Speed,
Soil Level, and Option settings for
that cycle.
C
If you would like to change the settings for
that cycle, press the appropriate cycle set-
ting button(s) until the indicator light for the
desired setting is lit.
NOTE: To protect your garments, not every
wash temp., spin speed, soil
level, or option is available with every cycle.
D
Select any additional cycle options, such
16
as PRE-WASH, RINSE+SPIN,
QUICK CYCLE, STAIN CYCLE,
or TUB CLEAN, by pressing the
OPTION button until the desired
option is lit.
NOTE: To protect your garments,
not every wash temp., spin
speed, soil level, or option is
available with every cycle.
E
Press the START/PAUSE button to begin
the cycle. The door will latch,
the display will change, and
the washer will calculate the
estimated time remaining. Once
the washer has calculated the estimated
total cycle time, the washer will start.
To pause the cycle at any time, press
START/PAUSE.
NOTE: The cycle time displayed may appear
much longer than that of a toploading
washer. The displayed time is for the
complete cycle, rather than just the agitation
portion of the cycle, as is typically shown on
a top-loading washer.
NOTE: If the temperature in the washer is
too high, the door cannot be unlocked until
the washer has cooled. If the water level is
too high, select the DRAIN & SPIN to drain
excess water. Do not try to force the door
open.
Washing time can be reduced significantly
for small or lightly soiled loads by selecting
the Speed Wash cycle and setting the Soil
Level button to Light.
F
When the load is finished, the signal (if set)
will sound and the door will unlock.
Remove damp clothes from the washer
immediately. Check under the door seal for
small items.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm2140c seriesWm2240c series

Table of Contents