Table of Contents
Advertisement
Calling in to conferences
Dialing into a conference using ConferenceMe
Your system adminstrator will email you a HTTP link to use with ConferenceMe. The
link will take the format
http://domain.name/conferencename
To join the conference using ConferenceMe, click the link in the email. If you are set up
to automatically join conferences, ConferenceMe will load and you will be connected to
your conference. Alternatively, a web browser will open; select Click here to join the
conference using ConferenceMe. ConferenceMe will load and you will be connected to your
conference.
To enter a PIN, use the number keys on your keyboard and press Enter.
Dialing in using an audio-only telephone
If your telephone system allows calls to the MCU, you can use your regular telephone to
join conferences as an audio-only participant. Dial the telephone number provided by
your system administrator followed by a '#'. This will either connect you to an auto
attendant (where you will need to enter the conference ID) or directly into your
conference. If a PIN is required, you will be prompted to enter it.
The conference welcome message
Your conference administrator can configure a welcome message on the MCU and a
duration for that message. If there is a welcome message, you will see it at the bottom of
your endpoint's display when you join a conference.
5
Advertisement
Table of Contents
