connection_proceeding
This event is seen during a call.
Section
Name
<connection>
unique_id
<call>
via_auto_attendant
final_called_number
isdn_numbers
multiway_call_transfer
This event appears when an H.323 call leg is transferred to a multiway conference.
Section
<connection>
<call>
<bandwidth>
<h323_endpoint_details>
Call Detail Record File Format Reference Guide
Description
The same unique identifier for the connection as
provided in the previous
format nnnnnnnn
Whether or not the connection was set up via the auto
attendant. Either yes or no
The final called number in the format <ip address:port
no> or a number as generated by the dial plan
The subcall number in the format subcall_n where n is
between 1 and 5. The full number is shown for
aggregation calls. For bonding calls, only the final
digits of the number are shown (that is, those numbers
that are different from the master call). There should be
n subcall attributes where n is the number of B-
channels used by the call minus 1. The contents of the
subcall attribute for aggregation calls should be the
subcall number, and for bonding calls should only be
those digits that differ from the main number as
described here.
Name
unique_id
duration
duration_in_minutes
disconnect_reason
max_bandwidth
downspeeded
ip_address
dn
h323_alias
new_connection
Description
The same unique identifier in the format nnnnnnnn
for the connection as provided in the previous
new_connection event
How long the transferred connection lasted in
minutes and seconds
How long the transferred connection lasted rounded
up to the nearest minute
A string specifying the reason why the call was
transferred. Can only be:
call_transferred_to_multiway_destination
The highest bandwidth seen during the lifetime of the
transferred connection in kbit/s
Whether or not the connection was downspeeded.
Either yes or no
The endpoint's IP address
Either <none> or the IP endpoint's E.164 number
The IP endpoint's configured endpoint name
ISDN gateways
event in the
Page 14 of 26
Need help?
Do you have a question about the TELEPRESENCE CALL DETAIL RECORDS FILE FORMAT and is the answer not in the manual?