Table of Contents
Advertisement
Preferences
Movi comes with predefined settings that should work out of the box for most users.
From the main menu select
Remember to store changes to settings by clicking OK when you are done.
General
By default Movi starts up at login.
Clear the Start TANDBERG Movi automatically at login check box to change this setting.
Network
If you experience low video quality, for example jitter, lowering the bandwidth can be help-
ful.
If you know that more bandwidth than the default setting is available, you may increase the
bandwidth setting for better video quality.
Note: Your IT administrator may limit the bandwidth options available to you.
Notifications and ringtone
You can decide when and how Movi shall notify you when calls come through.
To change the ringtone, follow these steps:
1. Use the drop-down menu and select one of the alternatives.
2. Listen to the tone by clicking the Play button. Note that you must stop one ring tone before
you can try another.
You may also want to tweak the following settings:
Do not play noti-
fication when I am
busy
Do not play noti-
fication when I am
in a call
Devices
You may want to use different audio and video devices than those Movi has picked by default.
For example, your camera and your Mac may both have built-in microphones.
The drop-down lists let you choose from all devices detected on your system:
Loudspeakers and/or headphones (audio output)
l
Microphones (audio input)
l
Movi User Guide
Movi >
Preferences.
You will see the pop up dialog when you have set your status to
Busy, but no ring tone will be played. This setting is enabled by
default.
You will see the pop up dialog when you are already in a call, but
no ring tone will be played. This setting is disabled by default.
Preferences
Page 6 of 19
Advertisement
Table of Contents
