Description Rearview; Lnb In; Lnb Out; Video Out - DREAM MULTIMEDIA DREAMBOX DM 500S User Manual

4.

Description Rearview

4.1.

LNB In

Connect the coaxial cable from your LNB here. Please switch the power off from the the Dreambox first.
4.2.

LNB Out

Connect an analogue receiver here. Remember to shutdown your Dreambox into Standby-Mode, if you
wish to view analogue TV.
4.3.

Video Out

This Port provides the CVBS (Color Video Blanking Signal).
4.4.

Serial Port

The Serial Port is mentioned to update the Operation system. Please connect a serial nullmodem cable
here. See passage DreamUp - Software upgrade.
4.5.

Audio Out (analogue)

Connect your Dreambox with an appropriate RCA/Cinch cable to your HiFi-Amplifier (e.g. AUX or Tape
socket).
4.6.

TV Scart

Connect your TV with an appropriate Scartcable to your Dreambox.
4.7.

Audio Out (digital)

Connect your Dreambox with an appropriate optical (Toslink) cable to your HiFi-Amplifier or DSP. The
Dreambox provides sample rates from 16, 22.05, 24, 32, 44.1, 48 kHz. The AC3 signal is also available at
this socket, if the selected channel transmits Dolby Digital signals.
4.8.

Powersupply Socket

Plug in here the Powersupply.
4.9.

Network Port

The Network Port is an Communication Port, used to communicate with the Dreambox via HTTP, FTP,
NFS, Telnet and Samba to access your recorded movies or to upload channel lists. This Port is also
mentioned to update the Operation system. Please connect an appropriate patchcable.
See passage DreamUp - Software upgrade.
- 6 -