A.3.2 Host Type Attributes; Table A-4. Host Type Attributes (For Mam) Supported By The Sdlt Tape Drive Firmware - Tandberg Data B DLTSAGE INTEGRATION Integration Manual

Table A-3. Device Type Attributes (for MAM) Supported by the SDLTtape
Attribute
Identifier
020Ah
020Bh
020Ch
020Dh
020Eh - 021Fh
0220h
0221h
0222h
0223h
0224h - 033Fh
0340h
0341h
0342h - 03FFh

A.3.2 Host Type Attributes

Application clients use the WRITE ATTRIBUTE command (8Dh) and the READ ATTRIBUTE
command (8Ch) to maintain the attributes listed in
read/write.

Table A-4. Host Type Attributes (for MAM) Supported by the SDLT Tape Drive Firmware

Attribute
Identifier
0800h
81-81201-01 Rev A01
Drive Firmware (Continued)
Name
DEVICE VENDOR/SERIAL
NUMBER AT LAST LOAD
DEVICE VENDOR/SERIAL
NUMBER AT LOAD-1
DEVICE VENDOR/SERIAL
NUMBER AT LOAD-2
DEVICE VENDOR/SERIAL
NUMBER AT LOAD-3
Reserved
TOTAL MBYTES WRITTEN IN
MEDIUM LIFE
TOTAL MBYTES READ IN
MEDIUM LIFE
TOTAL MBYTES WRITTEN IN
CURRENT/LAST LOAD
TOTAL MBYTES READ IN
CURRENT/LAST LOAD
Reserved
MEDIUM USAGE HISTORY
PARTITION USAGE HISTORY
Reserved
Name
APPLICATION VENDOR
Attribute
Length (bytes)
40
40
40
40
8
8
8
8
90
60
Table A-4. All host type attributes have a status of
Attribute
Length (bytes)
8
October 2003
DLTSage Integration Guide
Format
ASCII
ASCII
ASCII
ASCII
BINARY
BINARY
BINARY
BINARY
BINARY
BINARY
Format
ASCII
A-5