DREAM MULTIMEDIA DREAMBOX DM 500S User Manual page 32

TuxText viewing options:
Press the Volume-Mute-Button a couple of times to switch to alpha-mode, invisible-mode and full-mode.
The alpha-mode shows the picture from the running program through the Textpages.
The invisible-mode shows the complete picture from the running program without exiting the TuxText.
The full-mode brings back the Textpage.
Press the Volume + Button to toggle between double high from the upper half, double high from the lower
half and full view Textpage.
Press the Volume - Button to activate or deactivate the PIG-Mode (Picture in Graphics). Same view from
Textpage and Program picture. (best results are show on 16:9 TV's during 4:3 transmission).
TuxTxt Konfigurationsmenu:
Press the MENU-Button to enter the TuxText Konfigurationsmenu. We are sorry, at the moment, this
menu is only available in german.
Teletext – Auswahl:
Use the Navigation-Button left or right to choose another Teletext provider from the current Transponder
and press the OK-Button to view.
Bildschirmformat (Aspect Ratio):
16:9 im Standard-Modus = ein/aus (16:9 during Standard-Mode = enable/disable)
Enabling this, shows the TuxText in 16:9 Aspect Ratio. Press the OK-Button to enable or disable. Default
is disabled.
16:9 im TextBild-Modus = ein/aus (16:9 during TextPicture-Mode = enable/disable)
Enabling this, switches the TV to 16:9 Aspect Ratio if the PIG-Mode is activated with the Volume - Button.
Press the OK-Button to enable or disable. Default is disabled
Attention:
On some older 4:3 TV's these Modes may not work. If enabled, it could happen, that your TV switches
away from the VCR or A/V socket. The reason is a technicial problem. The Switchsignal on the
Scartconnector is at PIN 8 using 12 Volts. Using a 16:9 Aspect Ratio switches the PIN 8 to 6 Volts, which
some older 4:3 TV's can not handle. If you are using a 4:3 TV, we suggest not to enable these Modes.
Helligkeit (Brightness):
Anzeige 1/3 reduzieren = ein/aus (Display 1/3 reducing)
Enabling this, reduces the Brightness by 1/3. It makes the Display of the TuxText more smoother. If you
are watching Teletext Subtitles it's recommened to disable. Press the OK-Button to disable or enable.
Default is enabled.
nationaler Zeichensatz (national Codepage):
automatische Erkennung = ein/aus (automatic detection = enable/disable)
The national Codepage detection is used to display the Teletextpages with the right letters for your
location. Press the OK-Button to disable or enable. Default is enabled. If disabled, use the Navigation-
Buttons left or right, to choose your Codepage.
- 32 -