Table of Contents
Advertisement
Changing the
Drum Lamp
Using the
Drying Rack
Before replacing the drum lamp, be sure to unplug
the dryer power cord or disconnect the dryer at the
household distribution panel by removing the fuse
or switching off the circuit breaker.
The drum lamp is located at the top left of the door
frame.
1 Remove the screw holding the drum lamp shield
in place.
2 Slide the shield up and remove.
3 Remove the bult and replace with a 15-watt,
120-volt candelabra-base bulb.
4 Replace the lamp shield and screw.
A handy drying rack may be used for drying delicate
items such as washable sweaters.
Hook the rack over the lint filter so the rack extends
into the dryer drum.
NOTE:
• The drying rack should only be used with the
TIMED DRY or RACK DRY cycles. It is also
strongly recommended when drying sneakers.
• Do not use this drying rack when there are other
clothes in the dryer.
Dryer Features
GEAppliances.com
Screw
15
Hide quick links:
Advertisement
Table of Contents
