Xm Radio Messages; Sirius Radio Messages - Pioneer ELITE VSX-92TXH Operating Instructions Manual

Additional information

XM radio messages

Symptom Cause
Check Antenna The XM antenna is not connected.
Check Tuner
The XM Mini-Tuner is not properly connected.
XM Power Error A short-circuit occurring in the antenna or
surrounding antenna cable.
Updating The radio is being updated with the latest
encryption code.
No Signal The XM signal is too weak at the current location. n/a
Loading
The receiver is acquiring audio or program
information.
Off Air
The channel currently selected has stopped
broadcasting.
CH– – – You have selected a channel that does not exist,
or that you have not subscribed to.
– – – – – – – – There is no artist name/feature, song/program
title, or channel category associated with the
channel at this time.

SIRIUS radio messages

Symptom Cause
Antenna Error Antenna is not properly connected.
Check Sirius Tuner SIRIUS Connect tuner is not properly connected. Check that the 8 pin mini DIN cable and AC Adapter are
Acquiring Signal The SIRIUS signal is too weak at the current
location.
Subscription Updating
Unit is updating subscription.
Updating Channels Unit is updating channels.
Invalid Channel Selected channel is not available/does not exist. Select another channel.
Note
• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug
from the outlet and insert again to return to normal operating conditions.
Action
Check that the XM antenna cable is attached securely.
Check whether the XM Mini-Tuner is firmly connected to the
receiver.
Make sure that there is nothing unusual with the antenna or
antenna cable. Switch the power off then back on again.
Wait until the encryption code has been updated. Channels 00
and 01 should function normally.
Wait until the information has been received.
Select another channel.
The receiver will automatically switch to channel 001 (or the
last selected channel).
No action needed.
Action
Check that the antenna cable is attached securely.
attached securely.
n/a
Wait until the encryption code has been updated.
Wait until the encryption code has been updated.
13
89
En