Drying Program Finished; Once Drying Has Finished - Asko T702 Operating Instructions Manual

Operating instructions
7

Drying program finished

Important!
• Clean the lint filter after each load.
Caution!
If the lint filter becomes clogged, the machine's
automatic overheating cut-off may be triggered.
In order to be able to restart the machine, you
must clean the filter and allow the machine to cool
down for around 30 minutes.
Cleaning the lint filter
1. Grasp the filter handle and pull it toward you.
2. Pull the filter out of its holder.
3. Open the filter and remove the lint by hand.
4. Fold the filter up and insert it into its holder. The
filter may need to be cleaned if it has limescale
deposits. See the "Care and cleaning" chapter.
To install the automatic drain hose, please see
the section titled Installation
8

Once drying has finished

Turn off the main power switch. Remove
the clothes and close the door to prevent
small children from climbing into the machine.
Customer Care Center
1-800-898-1879
www.askousa.com
13