Brother HL 5370DW - B/W Laser Printer Network User's Manual page 91

k
You need to temporarily change your computer's wireless settings. Follow the on-screen instructions.
Make sure you take notes on all the settings such as the SSID, channel, authentication and encryption
of your computer. (See your note on page 77.) You will need them to return your computer back to its
original wireless settings, and then click Next.
l
To communicate with the un-configured wireless machine, temporarily change the wireless settings on
your computer to match the machine's default settings shown on this screen. Check the box after you
confirm these settings, and then click Next.
Note
You can temporarily change the wireless settings on your computer, following the steps below:
1) Click the AirPort status icon and choose Open Internet Connect....
2) Click the Network tab to see the available wireless devices. You can see the Brother wireless print
server in the Network option. Choose SETUP.
3) Your wireless network is connected successfully.
Wireless Configuration for Macintosh using the Brother installer application (For HL-5370DW)
5
81