Rio RECEIVER Frequently Asked Questions Manual page 9

NOTE: It is also possible to plug powered speakers into the Line Out jack located on
the back of the Digital Audio Receiver.
OR
b.) If connecting the Rio Receiver to your home theater system, use the
included RCA cable, which has a red and a white RCA connector at
each end. Plug the red RCA connector to the red jack and the white
RCA connector to the white jack on your stereo receiver. Plug the
other end's red RCA connector to the red jack and the white RCA
connector to the white jack on the Rio Receiver.
NOTE: When used with a stereo receiver, neither the Rio
Receiver nor its remote control the volume level as the
speakers are plugged into the stereo receiver.
3. Plug the Rio Receiver power cord into the back of the Rio Receiver and into nearest power supply.
4. Push the Power button on the Rio Receiver or on the remote. The Rio Receiver's liquid crystal display
(LCD) will display:
The Rio Receiver locates the server PC and the database of music files stored on that PC. If the Rio
Receiver does not find your PC, check the
correct this.
5. When it has finished querying your PC, the Rio Receiver will display the first song in the digital music file
database on your PC. It is now ready to bring your music to you.
Troubleshooting and FAQ
Installation
Return to Pg.1
sections of the manual for tips to
Page 9