Headlight High-Low Beam Changer; Windshield Wipermasher - Buick RIVIERA 1993 Manual

Headlight High-Low Beam
To
change the headlights
from low beam to high or
high to low, pull the turn
signal lever all the way
toward
you.
Then release it.
When the high beams are
on, a blue light on the
instrument panel also will
be on.
If
your headlights are on, but
on
low beam: The system
works normally. Just pull the lever until it clicks. Your
headlights will shift to high beam and stay there. To
return to low beam, just pull the lever toward you.
Windshield Wipers
Flash-To-Pass Feature
This feature lets you use your high beam headlights to
signal a driver in front of you that you want to pass. It
works even if your headlights are off.
To use it, pull the headlight beam toward you a little
(but not so far that you hear a click). When you do:
If your headlights are off Your high beam headlights
will turn on. They'll stay on as long as you hold the
lever there. Release the lever to turn them off.
.
.
. .
~
You control the windshield wipers by turning the band
marked "WIPER."
For a single wiping cycle, turn the band to "MIST."
Hold it there until the wipers start, then let go. The
wipers will stop after one cycle. If you want more
cycles, hold the band on "MIST" longer.
87