Increasing Speed While Using Cruise Control
There are two ways to go to
a
higher speed:
Use the accelerator
pedal to go to a higher
speed. Push the button at
the end of the lever, then
release the button and
the accelerator pedal.
You'll now cruise at the
higher speed.
Move the cruise switch
from ON to R/A. Hold it
there until you reach a
desired speed and then
release the switch. To
increase your speed in
very small amounts,
move the switch to RIA
for less than half a
second and then
release it.
Each time you do this, your vehicle will go about
1 mph (1.6 kmk) faster.
The accelerate feature will only work after you have set
the cruise control speed by pushing the SET button.
2-42