Table of Contents
Advertisement
Turn Signal and Lane Change Indicator
The
t u r n
signal has two upward (for right) and two,
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up
or down. When the turn is finished, the lever will
return automatically.
An
arrow on the instrument
panel will flash in the
direction of the turn or
lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or a lane change, if the arrows don't
flash but just stay on, a signal bulb may be burned out
and other drivers won't see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a
turn,
check the fuse (see "Fuses' and Circuit
Breakers" in the Index) and for burned-out bulbs.
2-35
Advertisement
Table of Contents
