Buick ENCLAVE - 2009 Owner's Manual page 219

•
If the system is not sure it
recognized the number
properly, it responds "Dial
Number, Please say yes or
no?" followed by a tone. If the
number is correct, say
"Yes". The system responds
with "OK, Sending Number"
and the dial tones are
sent and the call continues.
Sending a Stored Name Tag
During a Call
b g
1. Press . The system
responds with "Ready" followed
by a tone.
2. Say "Send name tag." The
system responds with "Say
a name tag to send tones"
followed by a tone.
3. Say the name tag to send.
•
If the system clearly
recognizes the name tag it
responds with "OK, Sending
<name tag>" and the dial
tones are sent and the
call continues.
•
If the system is not sure it
recognized the name tag
properly, it responds
"Dial <name tag>, Please say
yes or no?" followed by a
tone. If the name tag is
correct, say "Yes". The
system responds with "OK,
Sending <name tag>" and the
dial tones are sent and the
call continues.
Clearing the System
Unless information is deleted out of
the in-vehicle Bluetooth system, it
will be retained indefinitely. This
includes all saved name tags in the
phonebook and phone pairing
information. For information on how
to delete this information, see the
above sections on Deleting a Paired
Phone and Deleting Name Tags.
Other Information
®
The Bluetooth word mark and
logos are owned by the Bluetooth
SIG, Inc. and any use of such
marks by General Motors is under
Instrument Panel
license. Other trademarks and trade
names are those of their respective
owners.
This device complies with Part 15
of the FCC Rules. Operation is
subject to the following
two conditions:
1. This device may not cause
harmful interference.
2. This device must accept any
interference received, including
interference that may cause
undesired operation.
This device complies with RSS-210
of Industry Canada. Operation is
subject to the following
two conditions:
1. This device may not cause
interference.
2. This device must accept any
interference received, including
interference that may cause
undesired operation of the
®
device.
3-101