ACR Electronics NAUTICAST2 - REV A User Manual page 63

Dynamic Keys: Sensor Settings
[M5] [Save]
[M6] [Default]
[M7] [Analyce]
[M8] [Back]
Use this menu to set up the data speed 4800/9600/38400 baud.
Note:
This Configuration should be done from advanced user like installation technicians only. Therefore
you will find more details in the installation manual.
During the configuration process, the NAUTICAST2 is not operational.
User Manual
o o
N 1 19' E 0 12' |1> N/A|2>0.00|3>0.10nm
*********** Sensor Settings ************
BaudRate Sensor1:< 4800>
Ignored:$HC---$-----$-----$-----
$-----$-----$-----$-----
1>Start Monitor>
BaudRate Sensor2: 4800
Ignored:$HC---$-----$-----$-----
$-----$-----$-----$-----
2>Start Monitor>
BaudRate Sensor3: 38400
Ignored:$HC---$-----$-----$-----
$-----$-----$-----$-----
3>Start Monitor>
----------------------------------------
| Save | Default | Analyze | Back
Save Data Input
Restore the
default settings
Analye you NMEA
Data streem
Return to Menu
Configuration
CRC: auto
CRC: auto
CRC: auto
Select Data Field
[Up] /
for Configuration
[Down]
Select Data Field
[Enter]
for Configuration
[Left] /
Configure Data
[Right]
62
Y1-03-0218 Rev A