Sensor Settings
The screen provides the means to switch the sensor speeds. It allows the user to change sensor
interfaces from IEC61162-1 to IEC61162-2 settings. The data input fields are fitted with default
values. The [Up], [Down] buttons are used for menu navigation, the [Left] or [Right] buttons for
default data input.
Sensor Software Configuration
This is new in software version 2.0.1.x. The NAUTICAST2 offers the following configuration options:
•
Set up data speed 4800/9600/38400 baud.
•
Monitor the connected sensor inputs for each sensor channel.
•
Verify and edit the Sensor Configuration on the display screen.
•
Analyze the information received from the connected sensor devices.
•
Produce an electronic installation report.
•
Configuration of various NMEA protocols.
User Manual
61
Y1-03-0218 Rev A