Entering The Mmsi And Imo Numbers - ACR Electronics NAUTICAST - REV M Manual

1.2 Entering the MMSI and IMO Numbers

Select from the Main Menu "Service Configuration" Number 6. Menu is SERVICE password
protected (Please see Appendix 7.2 for password information). Enter Service Password and use the
up and down arrows on keypad to select "Change MMSI / IMO" than press M5 "Select" or "by
pressing number 3 on the keypad.
Input your MMSI and IMO number and press Save to store data. Unit will reboot itself after pressing
Save. Continue to 4.2 after reboot, if no IMO number is available use the value 0 (Zero).
N 1
-----| |
View | +- 2. AIS Status
-----| +- 4. Ship Settings
Msg. | +- 6. Service Configuration
-----| +- 8. Graphical Display Settings
Displ|
----------------------------------------
NUM |Select->|
Service Configuration Menu Example:
N 1
-----| |
View | +- 2. User Password Settings
-----| +- 4. Restore Factory Settings
Msg. |
-----|
Displ|
----------------------------------------
NUM| Select->|
Note: MMSI and IMO Data input are limited to 9 characters.
N 1
********** Change MMSI / IMO ***********
MMSI
IMO No.:303174162
----------------------------------------
NUM|
6
o o
19' E 0 13' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
| +- 1. Messages
| +- 3. Voyage Settings
| +- 5. Transponder Configuration
| +- 7. Display Settings
|
|
o o
21' E 0 14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
| +- 1. Change Service Password
| +- 3. Change MMSI / IMO
|
|
|
|
o o
21' E 0 14' |1> N/A|2>0.00|3>0.10nm
:1193046
Save | |
<-Back
|<-Back
| Back
Y1-03-0203 Rev. M