Table of Contents
Advertisement
Troubleshooting AppSpeed
Installation and Deployment
If you encounter problems when installing and deploying AppSpeed, use this troubleshooting information.
This chapter includes the following topics:
"AppSpeed Setup Errors,"
n
"Navigation to Web Page Cancelled,"
n
"AppSpeed View Does Not Load,"
n
"Unable to Connect to AppSpeed,"
n
"AppSpeed Server Namespace Is Not Recognized,"
n
AppSpeed Setup Errors
You might have problems while setting up AppSpeed.
Failed to Register AppSpeed with vCenter Server
n
You are unable to register AppSpeed with vCenter Server.
vCenter Server HTTPS Web Service Port Does Not Work with Port 443
n
You are unable to complete setup because the vCenter Server HTTPS Web service is not working.
vCenter Server HTTPS Web Service Port Traffic Is Blocked
n
You are unable to complete setup because the vCenter Server HTTPS Web service is not working.
Failed to Register AppSpeed with vCenter Server
You are unable to register AppSpeed with vCenter Server.
Problem
Setup fails and an error message appears.
Failed to register AppSpeed with vCenter Server:
Unable to find AppSpeed Server on the configured vCenter Server.
Cause
You entered the IP address of a vCenter Server that is not the server on which AppSpeed was installed.
Solution
1
Verify the vCenter Server IP address.
2
Run setup again and enter the correct IP address.
VMware, Inc.
on page 31
on page 32
on page 33
on page 33
on page 34
on page 31
on page 32
on page 32
9
31
Advertisement
Table of Contents
