Table of Contents
Advertisement
Procedure
1
Power on the AppSpeed virtual machine.
2
At the login prompt in the vSphere Client console, type
3
Type
stop_appspeed
4
Type
copy_appspeed_data_disk
AppSpeed copies the data from the original virtual hard disk to the new virtual hard disk. During the
process, error messages might appear. You can ignore these messages, unless the copy process stops before
completion.
A success message appears when the formatting is complete.
The new virtual hard disk includes the information that was on the original disk.
What to do next
Delete the original virtual hard disk. See
Delete a Virtual Hard Disk After Copying
After you have copied the contents of the original virtual hard disk to the new virtual hard disk, you must
remove the original disk from the AppSpeed virtual machine and delete the files.
Prerequisites
Copy the contents of the original virtual hard disk to a new virtual hard disk.
Procedure
1
Shut down the AppSpeed virtual machine.
2
Right-click the AppSpeed virtual machine in the vSphere Client inventory and select Edit Settings.
The Virtual Machine Properties window appears.
3
In the Hardware tab, select Hard disk 2 and click Remove.
4
Select Remove from virtual machine and delete files from disk, and click OK.
The virtual machine is reconfigured.
5
After the reconfiguration process is finished, power on the virtual machine.
The new virtual hard disk has been renamed Hard disk 2.
The original virtual hard disk is deleted and the AppSpeed virtual machine uses the new, larger virtual hard
disk.
VMware, Inc.
.
.
"Delete a Virtual Hard Disk After Copying,"
Chapter 7 Upgrading AppSpeed
.
console
on page 27.
27
Advertisement
Table of Contents
