Table of Contents
Advertisement
VMware vCenter AppSpeed Installation and Upgrade Guide
9
(Optional) Select the datastore on which to store the files for the virtual appliance, and click Next.
10 From the Management Network menu, select a network that has access to the other machines and to
vCenter Server to use to manage the probes.
AppSpeed Server uses this network to deploy and communicate with probes deployed on other hosts.
11 Click Next.
12 Review the installation summary and click Finish to begin installation.
When the installation is complete, the virtual appliance is added in the vSphere Client.
What to do next
In the vSphere Client, select Home > Inventory > Hosts and Clusters, and on the Getting Started tab click
Power on the virtual machine to start the virtual appliance.
Configure AppSpeed Server
You configure AppSpeed Server from the vSphere Client.
Procedure
1
Power on the AppSpeed virtual machine.
2
Ensure that the virtual machine is selected in the vSphere inventory tree, and click the Console tab.
3
At the login prompt, type
To accept the default value of a parameter, press Enter, or specify an alternative value.
The current value for each parameter appears in brackets.
If you need to exit the console after you begin the setup, press Ctrl+Alt. Click in the console again to
reinitiate the setup.
4
(Optional) Select a setting for the network management card.
a
Type
to use DHCP settings.
Y
b
Type
to set a fixed IP address.
N
You are prompted to set the IP address, netmask, and gateway for the management card.
c
(Optional) If you do not want to specify the gateway, type
5
Set the AppSpeed time zone.
If the time zone list does not fit in the console window, press question mark (?) to view all locations.
6
Configure the vCenter IP address, user name, and password.
7
(Optional) Specify the port number.
Type the port number immediately after the IP address, preceded by a colon (:). For example,
10.23.89.89:8080
8
Set a unique namespace for this AppSpeed Server.
The namespace can consist of up to 26 lowercase letters, digits, and dashes.
9
Confirm whether AppSpeed must be installed in such a way that vSphere cannot connect to it directly.
10 Confirm that you want to use the default vCenter port settings, or specify different port settings.
11 Press Enter to confirm that you want to complete the setup process.
12
.
setup
indicates port
on IP address
8080
.
0.0.0.0
.
10.23.89.89
VMware, Inc.
Advertisement
Table of Contents
