Advertisement
REFRIGERATOR FOR LP-GAS AND ELECTRIC OPERATION.
RM2301 RM2401
RM2501
RM2601 RM2801
FOR YOUR SAFETY
If you smell gas:
1. Open windows.
2. Don't touch electrical switches.
3. Extinguish any open flame.
4. Immediately call your gas supplier.
FOR YOUR SAFETY
Do not store or use gasoline or other
flammable vapors and liquids in the vi-
cinity of this or any other appliance.
USA
SALES OFFICES
Zone I
Elkhart, IN 46515
2320 lndustrial Pkwy.
Phone: 219-295-5228
Zone II
Arlington, TX 76011
2920 Avenue "E" East
Phone: 817-649-5726
820 45 52-00/7
quality leisure line products
Corporate OffIce
2320 lndustrial Parkway Elkhart, IN 46515
Zone Ill
City of Industry. CA 91746
14441 BoneIli Street
Phone: 818-968-9431
last page
CANADA
Dometic Distribution Inc.
866 Langs Drive
Cambridge, Ontario
N3H 2N7 Canada
Phone: 519-653-4390
Page
7-10
11-12
13
13
14
14
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dometic RM2301
Summary of Contents for Dometic RM2301
-
Page 1: Table Of Contents
REFRIGERATOR FOR LP-GAS AND ELECTRIC OPERATION. RM2301 RM2401 RM2501 RM2601 RM2801 FOR YOUR SAFETY If you smell gas: 1. Open windows. 2. Don’t touch electrical switches. 3. Extinguish any open flame. 4. Immediately call your gas supplier. FOR YOUR SAFETY... -
Page 2: Electrical Connection
The 12 V circuit must be fused. Maximum cir.- cuit fuse size: 15 Amps. for the models RM2301 and RM2401, 20 Amps. for RM2501, 25 Amps. for RM2601 and RM2801. -
Page 3: Special Hints
Be careful not to damage the sealing strip applied to the floor of the enclosure when the refrigerator is put in place. In the front frame and in the base at the rear of the refrigerator there are holes for screws for fixing the refrigerator in the enclo- sure. -
Page 4: Certified Installation
The methods of installation are shown in figures 10 a and 10 b. It is essential that all maximum or minimum dimensions are strictly maintained as the performance of the refrigerator is dependent on an adequate flow of air over the rear of the refrigerator. - Page 5 Side L: Bottom 0 M: Rear 1 N: See example below Clearance M between the rearmost part of the refrigerator and the wall behind the refrigerator Clearance N on top of the condenser is related to the minimum ventilation heiqht...
-
Page 6: Instructions For Use
When the recreational vehicle is stationary it must be leveled to be comfortable to live in. If the refrigerator is properly installed, i e the freezer shelf parallel to the floor, the refrigerator will then also perform well. - Page 7 To Shut Off the Refrigerator To shut off the refrigerator turn the knob A to off posi- tion. If the cabinet is not in operation over a period of weeks, it should be emptied and cleaned and the door left ajar.
-
Page 8: Gas Eqiupment
To replace the heater first of course check that the wall plug is disconnected. If the refrigerator is equipped also for 12 Volts D C ope- ration make sure that the 12 V leads are disconnected. -
Page 9: Maintenance
3/16” (5mm) and min. 1/8” (3mm). WARNING If the refrigerator is used intermittently it should be checked at least once a year. It is important to keep the appliance area clear and free from, combustible materials, gasoline and other flammable vapors and liquides. -
Page 10: Door Panel
The screws are accessible from beneath. Remove the top hinge pin and lift out the door. The lower pin for the refrigerator door should be shifted to the oppo- site side. The door can then be remounted. But before the front decoration check that the door closes well and the latch works properly.
Need help?
Do you have a question about the RM2301 and is the answer not in the manual?
Questions and answers
trouble shooting on why my Dometic refrigerator model rm2301 s not cooling I have tried all three systems
If your Dometic refrigerator model RM2301 is not cooling despite trying all three systems (LP-gas, 120V AC, and 12V DC), possible causes and remedies include:
1. Gas Supply Issues:
- The gas bottle may be empty—refill it.
- The flame failure safety device may not be heated enough—ensure it is properly ignited.
- The burner or by-pass screw may be clogged—clean or replace them.
2. Air Circulation Problems:
- Restricted air circulation around the cooling unit—ensure proper ventilation.
- The evaporator may be heavily frosted—defrost the refrigerator.
3. Component Issues:
- The flue baffle may not be inserted correctly—check and adjust it.
- The thermostat may be set incorrectly—adjust it closer to MAX in hot weather.
If none of these solutions resolve the issue, further inspection of electrical connections and gas components may be necessary.
This answer is automatically generated