Navigational Map Screens; Free Navigation - Binatone G500 - EDITION 4 User Manual

4th edition

Table of Contents

3 Navigational Map Screens

The navigational map screens will be the most frequently used screens. The two

navigation screens are free navigation and route navigation and are shown below. Though

the screens look very similar there are some differences.

1 Compass –

2 Zoom out –

3 Speed –

4 Menu button –

Navigation)

5 Time –

6 Map scale –

7 Volume –

8 Zoom in –

9 GPS reception – Shows the current status of the GPS signal, Shown greyed out if you

10 Position icon –

Shows your current heading by means of a letter, while the red part of

the compass needle always points North.

Tap to zoom out on the map.

Shows your current speed.

Tap to access the Free Navi Menu screen. (Only when in Free

Shows the current time (Note; this is set when you have a valid GPS

lock).

Show a scale bar which changes as the map zoom level is altered.

Tap to access the volume control menu.

Tap to zoom in on the map.

do not have a valid signal and white if you do. Tap to enter the GPS

status screen (see page 33).

Shows your current position on the map as well as showing your

current direction of travel.

NAVIGATION

Table of Contents

G500