Table of Contents
Advertisement
that it is highlighted orange and tap
change to show the Route Plan screen (see page 34).
Tap
to go back to the Search Menu screen.
Tap
to view the location on the map and once in the map view you can browse the
map (see page 19), to exit from the map view back to the previous screen tap
Tap
to delete the currently selected address book entry. Warning: you will not be
asked to confirm the deletion, so make sure that you wish to carry out this operation before
tapping.
6.5 Selecting a Point on the Map
This option allows you to move around the map
and to select a location which you want to use as
your destination.
Tap Point On Map the screen will change to show
the map. The location of the map will either be
your current/last known GPS position or the last
position you viewed on the map.
You can then browse the map (see page 19) and
select a point you want to navigate to by placing
the cursor.
After placing the cursor at a point on the map, it
may contain further information, i.e. if there is more than one POI at that point. In this case
you can use the
Tap
to go back to the Search Menu screen.
Tap
to confirm the point. The screen will then change to show the Route Plan screen
(see page 34).
6.6 Entering a set of Co-ordinates
This option allows you to enter the longitude and
latitude co-ordinates of the location you are looking
Tap Coordinates the screen will change to the co-
ordinates entry screen.
You can enter the co-ordinates in two different
ways, Degrees:minutes:seconds or as a Decimal,
unit automatically defaults to the
Degrees:minutes:seconds format (Note: when the
unit displays the co-ordinates of a location it
always shows then in the
Degress:minutes:seconds format).
or double tap to confirm. The screen will then
arrows to scroll between the multiple points.
25
NAVIGATION
.
for.
the
Advertisement
Table of Contents
