Poi In City - Binatone G350 - EDITION 4 User Manual

part name tap
The screen will change to show a list of all possible matching POI, scroll through the list of
POI until you find the one you are looking for and then tap
You will be taken to the Route Plan screen (see page
34).
At any point tap
screen, if you are on the POI Category screen
tapping will return you to the POI menu etc.
Tap to view the location on the map and
once in the map view you can browse the map (see
page 19), to exit from the map view back to the
previous screen tap
option of selecting a point from this map to navigate
to, this can be used to exactly pin point your location. Place the cursor on the point you
would like to navigate to and tap
and you selected point will be entered as the destination.
Note; When you carry out a search for a particular name of a POI. The unit will search from
a larger distance around your current position, than it did from the original search.
6.2.2 Around Address
Use this option to search for a POI in and around a
particular city. Before you can search for a POI you will
need to enter the name of the city you wish to search
around. For information on how to enter the city name,
see the section about entering a city under the Address
section (see page 20).
As with POI near Current Position you will then need to
select a category for your POI. You will then be shown
a list of POI in and around your entered city.
.
to return to the POI Category
. You also have the
Scroll through the list using the
you find the POI you are looking for. Select the
item so that it is highlighted orange then tap
or double tap the item to confirm. You will be taken
to the Route Plan screen (see page 34).
Alternatively you can tap in the white box at the
top of the screen. This will bring up a keyboard
screen, which allows you to search for the name of
a particular POI. After entering the whole name or
. You will be taken directly to the Route Plan screen
23
NAVIGATION
or keys till
or double tap to confirm.