HYOSUNG SD 50 Manual page 24

BATTERY TERMINAL
Clean the battery terminal when it is dusty or
rusted.
1. Deassemble the cover of battery box.
2. Set the ignition switch "OFF"position.
3. Clean the terminal. If there is white dust,
clean it with warm water.
4. Assemble the battery wires and grease the
terminal lightly.
▲CAUTION
!
∙ Keep the battery away from fires.
∙ When disassemble the battery wires, take
off � terminal first with the ignition
switch "OFF" position. When assemble,
� terminal first.
AIR CLEANER
1. Take off the air cleaner filter.
2. Wash it with cleaning solvent and dry.
3. Immerse it in motor oil squeeze the oil off
to make it slightly wet with oil.
4. Assemble the air cleaner filter.
NON-FLAMMABLE
CLEANI N G SOLVENT
▲CAUTION
!
∙ Don' t use the cleaning solvent whose
flash point is low when cleaning the
filter.
∙ Assemble the filter completely or
damage severely the engine.
∙ Be careful not to allow water to go
inside the air cleaner filter.
RUBBER CAP OF CABLES
Mope them up with a patch when washing.
24
OIL
RUBBER CAP