Adding Background Music; Importing Music From An Audio Cd - Ulead VIDEOSTUDIO 10 User Manual

106
ULEAD VIDEOSTUDIO USER GUIDE
4. Speak into the microphone and check if the meter responds accordingly. Use the
Windows audio mixer to adjust the volume of the microphone.
5. Click Start and begin speaking into the microphone.
6. Press [Esc] or click Stop to stop recording.
Tip: The best way to record narrations is to do the recording in 10 to 15-second
sessions. This makes it easier to remove a badly recorded narration and redo it. To
remove, just select the clip on the Timeline and press [Delete].

Adding background music

Set the tone of your movie with the background music of your choice. VideoStudio
can record and convert song tracks from your CD into WAV files and then insert
them onto the Timeline.
VideoStudio also supports WMA, AVI, and other popular audio file formats which
you can directly insert onto the Music Track.

Importing music from an audio CD

Capture music by importing from an audio CD. VideoStudio copies the CDA audio
file then saves it in your hard drive as a WAV file.
To import music from an audio CD:
1. Click Import from Audio CD in the Music & Voice tab to open the Rip CD
Audio dialog box. To check if the disc is detected, see to it that Audio Drive is
enabled.
2. Select the tracks to be imported in the Track List.
3. Click Browse and select the destination folder where the imported files will be
saved.
4. Click Rip to start importing the audio tracks.
To add third-party music:
1. Click the Auto Music tab.
2. Select how the program will search for music files in Scope.