Adding Background Music - Ulead VIDEOSTUDIO 11 User Manual

Note: You cannot record over an existing clip. When a clip is selected, recording is
disabled. Make sure that a clip is not selected by clicking on an empty area on the
Timeline.
3. Click Record Voice. The Adjust Volume dialog box appears.
4. Speak into the microphone and check if the meter responds accordingly. Use
the Windows audio mixer to adjust the volume of the microphone.
5. Click Start and begin speaking into the microphone.
6. Press [Esc] or click Stop to stop recording.
Tip: The best way to record narrations is to do the recording in 10 to 15-second sessions.
This makes it easier to remove a badly recorded narration and redo it. To remove, just
select the clip on the Timeline and press [Delete].

Adding background music

Set the tone of your movie with the background music of your choice. VideoStudio
can record and convert song tracks from your CD into WAV files and then insert
them onto the Timeline.
VideoStudio also supports WMA, AVI, and other popular audio file formats which
you can directly insert onto the Music Track.
Importing music from an audio CD
Capture music by importing from an audio CD. VideoStudio copies the CDA audio
file then saves it in your hard drive as a WAV file.
To import music from an audio CD:
1. Click Import from Audio CD in the Music & Voice tab to open the Rip CD
Audio dialog box. To check if the disc is detected, see to it that Audio drive is
enabled.
2. Select the tracks to be imported in the Track List.
3. Click Browse and select the destination folder where the imported files will be
saved.
4. Click Rip to start importing the audio tracks.
ULEAD VIDEOSTUDIO USER GUIDE
99