Ulead VIDEOSTUDIO 10 User Manual page 51

Click Options then select Capture Options to choose how you want footage to be
captured.
To specify the type of video source you are capturing from, click Options then
select Video and Audio Capture Property Settings. In the dialog box that
opens, you can customize the following capture settings:
• In the Source tab, choose whether you are capturing NTSC, PAL, or SECAM
video and select the Input source (Tuner, S-Video, or Composite).
• In the Color tab, you can fine tune the video source to ensure good quality
captures.
• In the Capture tab, set the frame size and compression method to use for
saving the captured video.
Adjusting source volume
VideoStudio has a Source Volume Panel that allows you to adjust the sound
volume of the analog source during capture. To use this panel, click Options,
select Capture Options, then select Display Source Volume Panel while
capturing.
Note: The Source Volume Panel is not available when you are capturing from an
analog device that has no audio source or a DV device.
To ensure that the sound volume of captured videos is clear, test capturing a short
video first and use the Source Volume Panel to adjust the volume level of the
analog source while capturing.
ULEAD VIDEOSTUDIO USER GUIDE
51