Table of Contents
Advertisement
76 VIDEO EDITOR
Trimming in the Preview Window
As you trim, Preview Window will display the real-time result of your actions. This
is a preferable way of trimming if precision is not critical but time is important.
To trim a video in the Preview Window:
1. Click-select a video clip in the Timeline.
2. Drag its edges to trim the clip. Notice the realtime preview of the trimming
operation in the Preview Window.
If the Preview Window and Trim Window are open simultaneously, the
feedback will be streamed to the Trim Window only.
Setting preview range in Preview Window is different from the trimming in the
Source Window or Trim Window. After you set the mark-in and mark-out points in
the Preview Window, your project preview range will be limited to the "trimmed"
duration that was set in the Preview Window.
To set a
preview range
Open the Preview Window
1.
2. Drag the little triangle trim handle on the left end to the desired play-in point.
Alternatively, drag the Jog slider to the position you want as the mark-in point
and then press [F3].
3. Drag the trim handle on the right to desired play-out point. Alternatively, drag
the Jog slider to the position you want as the mark-out point and press [F4].
4. Click Play Preview Range
segment.
Using the Trim Window
The Trim Window is the most precise method of trimming your clips, frame by
frame.
To use the Trim Window:
1. Select Window: Trim Window.
in the Preview Window:
.
in the Preview Window to play the trimmed
Advertisement
Table of Contents
