Table of Contents
Advertisement
226 VIDEO CAPTURE
By default, scanned clips are displayed in Thumbnail view. You can change the
display to List view by clicking the rightmost icon on the toolbar.
12.If you selected to Scan from beginning and capture in step 4, clips are
automatically captured after the scan.
If you chose one of the other two scan methods, choose the scenes you want to
capture by selecting or clearing the check boxes on the left panel, then click
Capture Video to start capturing them.
Scanned scenes can be combined and treated as one before capturing. To
do this, select the scenes that you want to combine and then click Join on
the toolbar. To undo this action, select the combined scenes and click Split.
13.Click Save on the toolbar to store the scan list as a DV album (.SCA) or HTML
file.
Next time, you can click Load on the toolbar in the Scan DV Tape dialog box
to import the scan list.
Batch capturing
Batch Capture allows you to choose multiple video segments from your footage
and capture them all at once. You can use Batch Capture when capturing video
from DV or HDV camcorders.
To mark video sequences and capture them:
1. Connect your camcorder to the computer. (See
details). Turn the device on and set it to VCR or VTR mode.
2. Select Capture: Batch Capture.
3. Click Capture Options and do the following:
• Select Device Control to open the Device Control dialog box. Select MS
1394 Device Control if you have a DV or D8 camcorder; select HDV
1394 Device Control if you have an HDV/HD camcorder.
• Select Change Capture Plug-in. Make sure the Ulead DirectShow
Capture Plug-in is selected if you are capturing from a DV/D8 camcorder
or the Ulead HDV Capture Plug-in when capturing from an HDV/HD
camcorder.
"Preparation" on page 197
for
Advertisement
Table of Contents
