Table of Contents
Advertisement
The pointer will change to a hand when placed over the trim area. Use this hand to
drag the two trim handles when trimming and moving the trim area as a whole.
Right-click on the trim area to automatically reset both trim handles to their
original positions at the beginning and end of the original clip. Both the Current
Position display and Trim Area display boxes can be manually edited. Just click
on the box and key in the new numbers to automatically re-adjust the Jog slider
and/or Trim handle.
To trim an audio clip:
1. Place the red vertical line where you want to begin the trim selection area.
2. Click the Mark-in button. The unselected area changes to a blue waveform on a
gray background.
3. Repeat steps 1 and 2 with the Mark-out button.
Alternatively,
drag the mouse over a selection.
4. Click the Apply button. The clip on the Timeline is adjusted.
Mark-in
point
Trim area
Mark-out
point
Zoom tool
Visible area
Additional unlabeled controls are the same as the Source Window for video
clips (see
"Using the Source Window" on page
a clip with attached video will also trim the corresponding video track.
to mark an audio clip segment, press the [Shift] key and
CHAPTER 3: EDITING 87
85). Trimming the audio track of
Advertisement
Table of Contents
