Toshiba 8200 - Tecra - PIII 750 MHz Supplemental Manual page 49

5 Click Override all Modes with settings here.
6 In the Set to range dialog box, do one of the following:
Click DC only if you want the settings to apply only
when you are using battery power.
Click All if you want the settings to apply whether you
are using battery power or outlet power.
7 Click OK.
8 Click OK again, then close the Control Panel.
NOTE: For more information about the Power Saver utility,
see Power Saver on page
Learning the Basics
Powering down the computer
55.
49