Brother 1870N - HL B/W Laser Printer Manual De L'utilisateur page 199

Branchement en réseau local
Attention
Branchez cet appareil à une connexion LAN qui n'est pas exposée à des
surtensions.
Geräuschemission / Niveau de bruit (Pour l'Allemagne uniquement)
Lpa < 70 dB(A) DIN 45635-19-01-KL2
IT power system (pour la Norvège uniquement)
This product is also designed for IT power system with phase to phase
voltage 230 V.
IMPORTANT - Wiring Information (Pour le Royaume-Uni uniquement)
If the power cord supplied with this printer is not suitable for your electrical
outlet, remove the plug from the mains cord and fit an appropriate three-pin
plug. If the replacement plug is intended to take a fuse then fit a fuse with
the same rating as the original.
If a moulded plug is severed from the power cord then it should be destroyed
because a plug with cut wires is dangerous if plugged into a live socket
outlet. Do not leave it where a child might find it.
In the event of replacing the plug fuse, fit a fuse approved by ASTA to
BS1362 with the same rating as the original fuse.
Always replace the fuse cover. Never use a plug with the cover omitted.
WARNING - THIS PRINTER MUST BE EARTHED.
The wires in the mains cord are coloured in accordance with the following
code :
Green and yellow:
Blue:
Brown:
A–29
Ground
Neutral
Live
ANNEXES