Cables And Connectors; Plastic Parts - Compaq 1200US - Presario - Celeron 800 MHz Maintenance And Service Manual

| Home Page
Illustrated Parts Catalog

Cables and Connectors

Most cables used throughout the unit are ribbon cables. Cables must be handled with extreme care to avoid
damage. Apply only the tension required to seat or unseat the cables during insertion or removal from the
connector. Handle cables by the connector whenever possible. In all cases, avoid bending, twisting, or
tearing the cables, and ensure that the cables are routed in such a way that they cannot be caught or
snagged by parts being removed or replaced.
Cables
Use the following precautions when handling cables to avoid damage to the cable or computer:
Always handle cables by their connectors.
Avoid bending, twisting, or pulling on the cables.
Apply minimum required force when seating or unseating the cables from their
connectors.
Place the cables in such a manner that they cannot be caught or snagged by parts being
removed or replaced.
Handle flex cables with extreme care; they can tear easily.
CAUTION: When serving these computers, ensure that cables are placed in
their proper location during the reassembly process. Improper cable placement
can cause severe damage to the unit.
Select the desired illustration.
Removing a Cable from a
The ribbon cable position for the
The ribbon cable position for the
The ribbon cable position for the
The cable position for the

Plastic Parts

Plastic parts can be damaged by the use of excessive force during disassembly and reassembly. When
handling the plastic parts, use care. Apply pressure only at the points designated in the maintenance
instructions.
Back to Top of Page
Return to Removal & Replacement Procedures
Maintenance & Service Guide
Presario 1200 Series
Models: 1230 and 1232
| Notice | Preface
| Removal & Replacement Procedures
Pin Assignments
ZIF Connector.
2.1-GB or 3.2 hard
CD drive.
diskette drive.
speaker assembly.
| Product Description
| Battery Pack Operations
drive.
| Troubleshooting
| Specifications