Desk Phone: Connect And Call; Choose Desk Phone Setup - Plantronics Savi 700 User Manual

Desk Phone: Connect and Call

Choose Desk Phone
Setup
Choose a desk phone setup A, B or C
A Desk phone (standard)
• Connect one end of the telephone interface cable to the back of the base
• Disconnect the handset coil cord from the base of the desk phone and re-connect it to the
telephone interface cable junction box.
• Finally connect the remaining end of the telephone interface cable into the open handset
port on the desk phone.
NOTE
If your phone has a built-in headset port, you should only use the headset port if you will
not be using the HL10 lifter. In this configuration, you must press both the headset button on your
phone and the call control button on the headset to answer or end calls.
B Desk phone + HL10 lifter (sold separately)
See the user guide at plantronics.com/accessories
C Desk phone + EHS cable (sold separately)
See the user guide at plantronics.com/accessories
and connect cables.
USE
for details.
USE
for details.
USE
11