Panic Keys; Using Panic Keys - Honeywell VISTA 15P - Ademco 6 Zone Control Panel User Manual

Panic Keys

Using Panic Keys

Your system may have been programmed to use special keys to manually activate
emergency (panic) functions as follows:
This Function
Silent Alarm
Audible Alarm
Personal Alarm
Fire Alarm
*All panic functions send signals to the Central Monitoring Station, if connected.
To activate a Panic Function:
Press and hold down for at least 2 seconds whichever
lettered key on the keypad has been programmed for
the desired emergency function.
OR
Press both keys of the assigned key pair at the same
time.
A
ZONE 95
B
ARMED
ZONE 99
READY
C
ZONE 96
D
Lettered Panic Keys
See your installer and use the chart provided in the Features Programmed in Your
System section to note the functions that have been programmed for your system.
– 26 –
National Security Systems Inc (800) 457-1999
Sends This Signal*
silent alarm
audible alarm
auxiliary alarm
fire alarm
1 2 3 ZONE 95
OFF AWAY STAY
4 5 6
MAX TEST BYPASS
7 8 9
CODE CHIME
INSTANT
0 #
READY
With This Sounding...
no audible alarm; displays, "Press [∗]
to show faults," indicating that a
silent alarm has been initiated.
a loud, steady alarm at keypad(s) and
at any external sounders that may be
connected.
steady alarm sound at keypad(s), but
not at external bells or sirens.
temporal (pulsing) sound at external
bells and sirens.
Normal Alpha Display:
∗∗∗∗DISARMED∗∗∗∗
READY TO ARM
Fixed-Word Display: READY
Typical Panic Alpha Display:
ALARM 96 ZONE 96
Fixed-Word Display: 96 and ALARM
1 2 3
ARMED
OFF AWAY STAY
4 5 6
READY
MAX TEST BYPASS
7 8 9
INSTANT CODE CHIME
0 #
READY
ZONE 99
Panic Key Pairs
PRESS BOTH KEYS
OF DESIRED PAIR
AT THE SAME TIME
ZONE 96