Sony PCV-R532DS - Vaio Digital Studio Desktop Computer User Manual page 459

Online help center (vaio user guide) (large file - 20.02 mb)

Hide thumbs Also See for PCV-R532DS - Vaio Digital Studio Desktop Computer:

Table of Contents

outer panel up over the unit and set it aside.

Inserting an Add-in Board

Models PCV-R536DS/PCV-R538DS/PCV-R539DS

There are three PCI expansion slots in this computer. One slot contains the factory-installed

modem card. The other slots are empty, enabling you to install add-in boards to expand the

functionality of your system. You can install add-in boards that support Microsoft

Second Edition and the PCI revision 2.1 specification.

Model PCV-R532DS

There are four PCI expansion slots in this computer. Slot 1 contains the factory-installed modem

card, and Slot 2 contains the i.LINK

install add-in boards to expand the functionality of your system. You can install add-in boards that

support Windows

To insert an add-in board

Make sure you observe the proper safety precautions when you add boards to your Sony computer. See

Notes on Use

1. Shut down your computer and turn off all peripheral devices, such as your printer.

2. Unplug your computer and any peripheral devices.

3. Remove the cover as described in

4. Locate one of the available expansion slots. Remove the screw, and then remove the slot cover.

(IEEE-1394) card. The other slots are empty, enabling you to

98 and the PCI revision 2.1 specification.

Removing the Cover