Sony PCV-R532DS - Vaio Digital Studio Desktop Computer User Manual page 11

®
S5 - Quicken
S6 - Help
All six buttons are reprogrammable.
Applications That Use the TWAIN Driver
Digital imaging applications, such as Adobe PhotoDeluxe,
computer from external devices, including scanners or digital cameras. For some devices, a TWAIN
driver window appears on the screen. Always close the TWAIN driver window before exiting or
minimizing a digital imaging application.
Memory Upgrade Specifications
When upgrading memory, use only 3.3V 64-bit PC-100 168 PIN SDRAM DIMM modules. Sony
computer supplies, accessories, and peripherals can be purchased from your dealer or by
contacting Sony at
http://www.sony.com/accessories.
Restoring Outlook 98
For the Add New Components functionality to be available with Microsoft Outlook, you must first
run the installation program for Outlook from the Application Recovery CD. When prompted to
install the program, select Exit. This decompresses the software, making the Add New Components
functionality available.
Using DVgate Motion
When capturing clips:
Do not use DVgate Motion when the connected digital video peripheral is in Timer Recording mode,

as this could produce a malfunction in the peripheral.
Captures larger than 2 GB (9 minutes and 30 seconds) are automatically continued in a second

file.
You can record stereo audio (stereo 1) while capturing video. You cannot add audio on the stereo

2 track after capturing the video data.
You cannot use different audio modes on the same tape. You should perform a separate capture

for each audio mode you wish to use.
DVgate Motion does not support hard disk compression. You should not use disk compression if

you are planning to work with DVgate Motion.
Title data is saved in the flash memory of a digital video camera and is not transferred to tape by

DVgate Motion.
To avoid interruption of capture sessions, you should disable the screen saver.

The drop frame compensation feature does not provide accurate compensation adjustments for

tapes recorded in LP mode.
For tapes that include a mixture of both SP and LP mode, the information displayed by the capture

progress indicator may not be accurate.
Make sure the video head of your digital video device is properly cleaned. Anomalies that you see

in captured data could be due to dust or other particles on the video head.
The last frame captured is one frame before your selected [OUT] point. The frame you see
o
immediately after clicking the [OUT] button is not captured.
When recording AVI files to tape:
Do not use DVgate Motion when the connected digital video peripheral is in Timer Recording mode,

Basic 99(Finance)
®
allow you to transfer images to your
Page 11