Sony PCV-MXS20 - Vaio Desktop Computer Getting Started Manual page 59

2 Select the desired sound mode from the drop-down list.
3 Click Close. The next time you play a song, the selected sound mode is
applied to the song.
To use custom equalizer settings
1 Click . The MX Equalizer Editor dialog box appears.
2 Select User1 or User2, and click Edit.
3 Set your desired adjustments to the Center frequency, Q-value and gain, by
using the sliders.
4 Set the Bass Boost, as desired, by selecting the On option of the Bass boost.
Move the slider to adjust levels.
5 Set the Treble, as desired, by selecting the On option of the Treble. Move the
slider to adjust levels.
6 Click OK. The MX Equalizer Editor dialog box closes and the settings are
registered for User1 or User2, depending on your selection.
7 Click OK. The MX Equalizer window closes.
Using sound effect settings
1 Click
effect from the menu.
EFFECTS
Vocal Canceller
Reverb
Settings
2 Click Close. The next time you play a song, the selected sound effect is
applied to the song.
✍
You may hear distortion during playback of some songs when sound effects have been
added. If this occurs, select "Sound Effect Off" to turn off the sound effect.
You cannot apply sound effects to songs on a MiniDisc, audio from an FM radio
station, or music from an external output.
. A sound effects menu displays. Select the desired sound
Reduce or cancel the vocals in a song. You can also change the
pitch of a song.
Add reverberation to the sound, emulating different sound fields.
Make fine adjustments to each sound effect.
SonicStage Premium Software
DESCRIPTION
59